1. Paper – I, which is the first phase of the selection process, is an Objective Type Computer Based Test.
2. Paper – II, which is the second stage, is a Descriptive Type Written Test.
Paper – I
Sections
|
Number of Questions
|
Maximum Marks
|
General Intelligence & Reasoning
|
50
|
50
|
General Awareness
|
50
|
50
|
General Engineering
Part A: General Engineering (Civil & Structural)
(or)
Part B: General Engineering (Electrical)
(or)
Part C: General Engineering (Mechanical)
|
100 for each part
|
100
|
Key Points To Remember Regarding SSC JE Exam Pattern For Paper – I
-
General Intelligence & Reasoning and General Awareness sections will be common for all three streams.
-
In the General Engineering section, candidates have to attempt the sections as per their branches (i.e., either civil or mechanical or electrical).
-
Candidates have to complete Paper – I in 2 hours (120 minutes).
-
0.25 % marks will be deducted for every wrong attempt.
-
1 mark will be given for each right attempt.
-
If the candidate does not attempt the General Engineering section as per the instructions given in Paper – I, then his answer sheet will not be evaluated by the board.
Paper-II
Candidates who qualify in Paper – I are eligible to appear for Paper 2.
Sections
|
Maximum Marks
|
Part A: General Engineering (Civil & Structural)
(or)
Part B: General Engineering (Electrical)
(or)
Part C: General Engineering (Mechanical)
|
300
|
Key Points To Remember Regarding SSC JE Exam Pattern For Paper – II
-
There will be three parts in Paper-II under General Engineering, and candidates have to attempt them as per their branch.
-
If the candidates have attempted a part other then instructed then his answer sheet will not be evaluated by SSC
-
0.25% negative marking will be applied to every wrong attempt.
-
Candidates have to complete paper – II in 2 hours
The SSC Junior Engineering exam has two papers – Paper 1 and Paper 2. Candidates appearing for SSC JE exam should be aware of SSC JE syllabus along with the important topics. In this article, we will give detailed SSC JE Syllabus for all engineering branches.
SSC JE 2022 Syllabus For Paper 1
SSC JE Paper 1 is conducted in the online mode and has three sections:
a. General Intelligence and Reasoning
b. General Awareness
c. General Engineering
The General Engineering section is different for different branches. The detailed SSC JE Syllabus for each of these sections are tabulated below:
Sections
|
Syllabus
|
Marks
|
SSC JE Syllabus For General Intelligence & Reasoning
|
1.Decision Making
2.Visual Memory
3.Relationship Concepts
4.Arithmetical Reasoning
5.Verbal and Figure Classification
6.Arithmetical Number Series
7.Abstract Ideas and Symbols and Their Relationships
8.Arithmetical Number Series
9.Arithmetical Computations and Other Analytical Functions
10.Space Visualization
11.Problem Solving
|
50 marks
|
SSC JE Syllabus For General Awareness
|
1.Economic Science
2.General Polity and Scientific Research
3.Current Affairs
4.India and its Neighboring Countries
|
50 marks
|
SSC JE Syllabus For Civil Engineering (Part-A)
|
1. Building Materials
2.Estimating, Costing and Valuation
Soil Mechanics
3.Irrigation Engineering
4.1st and 2nd Law of Thermodynamics
5.IC Engine Performance
6.IC Engine Cooling and Lubrication
7.Ranking Cycle of System
8.Fitting & Accessories
9.Air Compressors & their Cycles
10.Refrigeration Cycles
11.The Principle of Refrigeration Plant
12.Nozzles & Steam Turbines
13.Properties & Classifications Of Fluids
14.Fluid Statics, Measurement of Fluid Pressure
15.Transportation Engineering
16.Environment Engineering
|
100 marks
|
SSC JE Syllabus For Structural Engineering (Part-A)
|
1.Theory of Structures
2.Concrete Technology
3.RCC Design, Steel Design
|
|
SSC JE Syllabus For Electrical Engineering (Part-B)
|
1.AC Fundamentals
2.Measurement and Measuring Instruments
3.Electrical Machines
4.Fractional Kilowatt Motors and Single Phase Induction Motors
5.Synchronous Machines
6.Transmissions and Distribution
7.Estimating and Costing
8.Utilization and Electrical Energy
9.Basic Electronics
10.Circuit Law
11.Magnetic Circuit
|
|
SSC JE 2022 Syllabus For Paper 2
SSC JE Paper 2 will be conducted in offline mode. It is different for different engineering branches.
SSC JE Syllabus For Civil Engineering (Part A)
S.No.
|
Sections
|
Topics
|
1.
|
Building Materials
|
1.Physical and chemical properties
2.Classification, Standard Tests, Uses and Manufacture/Quarrying of Materials
|
2.
|
Estimating, Costing and Valuation
|
1.Estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, and Plastering.
2.Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezoidal formula, Simpson’s rule.
3.Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps.
4.Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of Valuation.
|
3.
|
Surveying
|
1.Principles of surveying, measurement of distance, chain surveying.
2.Working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying.
3.The odolite traversing, adjustment of theodolite, Leveling, Definition of terms used in leveling, contouring, curvature and refraction corrections.
4.Temporary and permanent adjustments of dumpy level, methods of contouring.
5.Uses of contour map, tachometric survey, curve setting
6. Earthwork calculation, advanced surveying equipment.
|
4.
|
Soil Mechanics
|
1.Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses.
2.Index properties of soils, Atterberg’s limits, ISI soil classification and plasticity chart.
3.Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, effective stress, quicksand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement.
4.Shear strength of soils, direct shear test, Vane shear test, Triaxial test.
5.Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test.
|
SSC JE Syllabus 2022 For Electrical Engineering (Part B)
Basic Concepts
|
Concepts of resistance, inductance, capacitance, and various factors affecting them.
Concepts of current, voltage, power, energy and their units.
Circuit law : Kirchhoff?s law, Simple Circuit solution using network theorems.
Magnetic Circuit : Concepts of flux, mmf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoidal, etc.
Electromagnetic induction, self and mutual induction.
|
AC Fundamentals
|
Instantaneous, peak, R.M.S. and average values of alternating waves.
Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit.
Poly Phase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit.
|
Measurement and Measuring Instruments
|
Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement.
Measurement of frequency and phase angle.
Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges.
Use of CRO, Signal Generator, CT, PT and their uses.
Earth Fault detection.
|
Electrical Machines
|
D.C. Machine – Construction, Basic Principles of D.C. motors and generators, their characteristics, speed control and starting of D.C. Motors. Method of braking motor, Losses and efficiency of D.C. Machines1 phase and 3 phase transformers – Construction, Principles of operation, equivalent circuit, voltage regulation, O.C. and S.C. Tests, Losses and efficiency.
Effect of voltage, frequency and wave form on losses. Parallel operation of 1 phase /3 phase transformers.
Auto transformers,phase induction motors, rotating magnetic field, principle of operation, equivalent circuit, torque-speed characteristics, and starting and speed control of 3 phase induction motors.
Methods of braking, effect of voltage and frequency variation on torque speed characteristics.
|
Fractional Kilowatt Motors and Single Phase Induction Motors
|
Characteristics and applications.
Synchronous Machines – Generation of 3-phase e.m.f. armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power.
Starting and applications of synchronous motors.
|
Generation, Transmission and Distribution
|
Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults.
Switchgears – rating of circuit breakers, Principles of arc extinction by oil and air, H.R.C. Fuses, Protection against earth leakage / over current, etc. Buchholtz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars.
Lightning arresters, various transmission and distribution system, comparison of conductor materials, efficiency of different system.
Cable – Different type of cables, cable rating and derating factor.
Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations
|
Estimation and Costing
|
Estimation of lighting scheme, electric installation of machines and relevant IE rules.
Earthing practices and IE Rules.
|
Utilization of Electrical Energy
|
Illumination
Electric heating
Electric welding
Electroplating
Electric drives and motors
|
Basic Electronics
|
Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type) BJT and JFET.
Simple circuits using these devices
|
SSC JE Syllabus 2022 For Mechanical Engineering (Part C)
Theory Of Machines and machine Designs
|
Concept of simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy
Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears –Type of gears etc.
|
Engineering Mechanics and Strength of Materials
|
Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit.
Elastic constants, Bending moments and shear force diagram, Stress in composite bars etc.
|
Thermal Engineering
|
Properties of Pure Substance1st & 2nd Law of Thermodynamics
Air standard Cycles for IC Engines.
Rakine Cycle of steam
Bolilers
|
Fluid Mechanics Machinery
|
Properties & Classification of fluid
Fluid Statics
Measurement of Fluid Pressure
Fluid Kinematics
Dynamics of Ideal Fluids
Measurement Of Flow Rate Basic Principles
Hydraulic Turbines
Centrifugal Pumps
Classification Of Steels
|
SSC JE 2022:Pre-Exam Training
There is no Pre - Exam Training conducted for SSC JE Exam.
SSC JE 2022:Interview Detail
No, the interview is not conducted for any post in SSC JE.
New SSC JE Salary and Perks
Post Name
|
Grade Pay
|
SSC JE In-hand Salary
|
SSC JE Gross Salary
|
Junior Engineer (Civil)
|
4200
|
29455 to 33907
|
32667 to 37119
|
Junior Engineer (Civil)
|
4200
|
29455 to 33907
|
32667 to 37119
|
Junior Engineer (Civil)
|
4200
|
29455 to 33907
|
32667 to 37119
|
Electrical and mechanical Junior Engineer
|
4200
|
29,455 to 33,907
|
32667 to 37119
|
JE Quantity Surveying and Contract
|
4200
|
29,455 to 33,907
|
32667 to 37119
|
The SSC JE in hand salary is the final salary which the employee gets after deducting all kinds of taxes and PFs.
Follow these steps to apply for SSC JE online:
-
First of all, log in to the official website http://ssc.nic.in
-
Register as a new user at the website which can be created by using a valid email ID and phone number. You will get the OTP for the required ID you want to generate for the SSC portal.
-
After you click on the Apply button, you will get the application form, fill it online.
-
You need to have the scanned copies of the recent passport size photograph, signature, and thumb impression to fill the application.
-
You can pay the application fee online or through a Challan which will be generated after you have filled in the required application for SSC JE Exam.
-
After registration click on the Apply button to get the application submitted to the portal.
-
Then click on the Submit button after cross-checking the details or else you will not be able to make any changes afterward.
-
Download the duly filled-in application form.
-
Take the printout for future references.
• For Others: Rs.100/-
• For SC/ST/PWD/ Women/ ESM candidates: Nill
• Payment Mode (Online/ Offline): SBI Challan/ SBI Net Banking by using Visa, Master Card, Maestro, RuPay Credit/ Debit Card
Read the instructions carefully to download the SSC Junior Engineer Admit Card:
-
Visit the official website at ssc.nic.in
-
Click on the link “SSC JE Admit Card”
-
Visit the respective regional website of SSC
-
Click SSC JE Admit Card link
-
Enter the required credentials such as registration number and date of birth
-
SSC Junior Engineer Admit Card for paper 1 will be shown on the webpage
-
Take a print out of the same
SSC JE 2019-20 Tier-I Result Out
Staff Selection Commission has released the result of SSC JE 2019-20. SSC JE Tier-Iwas conducted from 27th October to 30th September 2020 & 10th & 11th December. Those Candidates who are appeared in the exam can now check their results by clicking on the link given below.
SSC JE Result 2019: Important Dates
Events
|
Dates
|
SSC JE 2018-19 Tier-I Exam Date
|
27th October 2020 to 30th September 2020 & 10th & 11th December
|
SSC JE Tier-I Result Released
|
1st March, 2020
|
SSC JE Tier-II Exam Date
|
21st March, 2020
|
Click here to check SSC JE Tier-I Result [Electrical/Mechanical]
Click here to check SSC JE Tier-I Result [Civil]
SSC Junior Engineer Tier-I 2019 Final Answer Key Out
The result for Junior Engineer (Civil,Mechanical,Electrical and Quantity Surveying & Contracts) Examination, 2019 (Paper-I) has been declared by the Staff Selection Commission on 01.03.2022. SSC has uploaded the answer keys along with the question papers on their official websites. Candidates can download their answer keys as well as question paper from 8th March 2022 to 28th March 2022.
Click here to check the official notification of SSC Junior Engineer Tier-I 2019 Final Answer Key
Click here to check the SSC Junior Engineer Tier-I 2019 Final Answer Key
SSC JE 2018: Previous Year Result
SSC JE Tier-I: Result Out
Staff Selection Commission has released Junior Engineer, SSC JE Result 2018. SSC JE Exam was conducted between 23rd to 27th September 2019.
SSC JE exam result will be released by the commission soon after the exam is held. Candidates can check the result at the official website i.e. ssc.nic.in. In order to check the result, candidates have to search in with their respective SSC JE exam roll number.
Given below are the steps to check the SSC JE Result –
- Visit the official website at ssc.nic.in
- Click JE tab under the Result tab
- Click on the respective link “SSC JE Result”
- A pdf file will get open, search your roll number to check your result
SSC JE 2017-18:Previous Year Exam Analysis
Overall Analysis
SSC JE 2017-18 Exam was easy. Candidates shared that a large number of questions across all the sections were easy to attempt and only a small percentage was difficult.
Section-wise Analysis
About 35-40 questions were easy, 6-7 were moderately difficult and only 2 questions were difficult in this section. Overall, candidates found this section to be easy. Below is the number of questions asked from different topics.
S. No.
|
Topics
|
No. Of Ques
|
1
|
Coding-Decoding
|
6
|
2
|
Number & Alphabetical Series
|
12
|
3
|
Inequality
|
1
|
4
|
Analogy
|
2
|
5
|
Odd one Out
|
10
|
6
|
Syllogism
|
3
|
7
|
Statement & Conclusions
|
0
|
8
|
Dice
|
1
|
9
|
Directions Sense
|
3
|
10
|
Sitting Arrangement
|
1
|
11
|
Non-verbal: Complete the Image, Embedded Image, Paper Folding & Cutting, Mirror Image
|
5
|
12
|
Venn diagram
|
1
|
13
|
Blood relations
|
2
|
14
|
Matrix
|
1
|
15
|
Mathematical Calculations
|
2
|
|
Total No. Of Questions
|
50
|
(ii) General Awareness:
S. No.
|
Topics
|
No. Of Ques
|
1
|
Science
|
17
|
2
|
History
|
7
|
3
|
Polity
|
6
|
4
|
Geography
|
5
|
5
|
Economics
|
6
|
6
|
Current Affairs
|
9
|
Total No. of Questions
|
50
|